Step 1: Connecting the network
Utilize the first FastEthernet interface on the ISR router to connect to the last FastEthernet interface on the Floor 1 switch.
Utilize the first FastEthernet interface on the ISR router to connect to the last FastEthernet interface on the Floor 1 switch.
- Connect GigabitEthernet 1/1 on the Floor 1 switch to GigabitEthernet 1/1 on the Floor 2 switch.
Step 2: Configure basic switch and router configurations
Utilize the following table to configure the ISR router, Floor 1, Floor 2, and Floor 3 switches.
- ISR router
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname ISR_Rtr
ISR_Rtr(config)#enable pass cisco123
ISR_Rtr(config)#line vty 0 4
ISR_Rtr(config-line)#pass class
ISR_Rtr(config-line)#login
ISR_Rtr(config-line)#line console 0
ISR_Rtr(config-line)#pass class
ISR_Rtr(config-line)#login
ISR_Rtr(config-line)#^Z
%SYS-5-CONFIG_I: Configured from console by console
ISR_Rtr#wr mem
Building configuration...
[OK]
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname ISR_Rtr
ISR_Rtr(config)#enable pass cisco123
ISR_Rtr(config)#line vty 0 4
ISR_Rtr(config-line)#pass class
ISR_Rtr(config-line)#login
ISR_Rtr(config-line)#line console 0
ISR_Rtr(config-line)#pass class
ISR_Rtr(config-line)#login
ISR_Rtr(config-line)#^Z
%SYS-5-CONFIG_I: Configured from console by console
ISR_Rtr#wr mem
Building configuration...
[OK]